Liqui Moly 500ml Pro-Line Engine Flush 2037

Liqui Moly 500ml Pro-Line Engine Flush 2037

Ahighly effective formulation designed for quick and safe removal of deposits in engines before an oil change. Optimizes oil consumption, guarantees proper oil pressure in hydraulically activated systems and ensures proper oil flow after a cold start. Allows the fresh oil to immediately develop full performance while restoring full engine performance and reducing exhaust emissions.

Suitable for the use with most 4-stroke gasoline and diesel engines. Tested safe for the use with catalytics and turbochargers. Minimum oil filling of 3 liters (3.17 U.S. QT) is requested for optimum product performance.

Note: One 500 ml can is sufficient for up to 5 liters(1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the engine to idle for 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. Pro-Line Engine Flush is compatible with most commercially available engine oils, and in oil running belt. Minimum oil filling of 3 liters(0.8 gal.) is requested for optimum product performance.Observe: Not suitable for use on motorbikes with wet clutches.

Made in Germany, Quality at the highest level. A promise we stand by.LIQUI MOLY delivers a comprehensive range of motor and gear oils, fuel and oil additives,care products, chemical problem solvers and service products.

Our additives protect your engine, reduce your fuel consumption, reduce friction and wear, reduce oil consumption and protect against corrosion.

Brand: Liqui Moly
Part Number: 2037

Note: Image is for reference only, actual product may vary slightly.