Heavy Duty Drive Belt for Polaris – Gates / Napa G-Force 25G4076

Gates CVT Drive Beltfor Polaris

This CVT drive belt fits Polaris ATVs and UTVs.

Belt description:

• CVT (-Continuous Variable Transmission-)
• Napa G-Force -25G4076
• Polaris ATVs andUTVs
• ReplacesDaycoXTX2266
• Replaces Polaris3211169
• Length: 1065mm (41.937 in)
• Width: 32mm (1.246 in)
• High Performance Neoprene with Carbon Tensile Cords for Optimal Power Transmission and Increased Side Load Resistance

Fits the following Polaris models:

• 2017 ACE 500cc
• 2016 – 2017ACE 570 567cc
• 2015 M1400 325cc
• 2014 – 2018 Ranger 500cc and 567cc
• 2014 – 2018 Ranger Crew 567cc
• 2015 – 2016Ranger ETX 325cc
• 2016 Ranger XP 567cc
• 2015 Sportsman ACE 570 567cc

The fastest way to ruin your new powersport drive belt is to simply install it. If you dont break the belt in properly, youll find yourself shredding the belt instead of the terrain. In fact, most powersport belt failures can be attributed to improper break-in and clutch adjustment or not breaking in the belt at all.

Ensure the best performance and longest life from your G-Force belt. Follow these three steps when installing a new belt.

1. Install the Right Belt. Using a belt thats even slightly different than the OE specs can affect performance or stop you in your tracks.

2. Align and Clean. Align the clutches according to manufacturers specifications and clean the sheaves with a Scotch-Brite pad. Remove old belt residue, glazing, oils and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.

3. Install and Break It In. Perform two heat cycles in 20 miles. Conservatively run through the entire shift range, without exceeding throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.