Oversized Water Pump Impeller Kit For KTM 500 EXC-F 2017-2024

Features:

• Faster Cooling-Enlarge impeller vanes allow more coolant to pass through the water pump at the same engine speed. Lower the temperature of the coolant by 10-15 degrees than standard, optimizing the overall performance of your bike.
• Extended Space-The aluminum spacer Increases the overall volume of coolant passing through the water pump and improves heat exchange.
• Lightweight Aluminum-Made from premium 6061-T6 aluminum that provides superior hardness at the lowest possible weight.
• Race Look-Processed by cutting-edge anodic oxidation to maintain its original appearance over time and enhance the bike’s character.
• CNC Technology-Boasts the latest CNC technology, the accuracy of each cutting part can be ensured for easy installation.

Item Specifications:

• Brand: NICECNC
• Condition: 100% Brand new
• Material: Billet Aluminum
• Processing: CNC-machined
• Surface: Anodization

Package Included:
1x Oversized Water Pump Impeller Cooler Kit

Fitment:

• FOR KTM

450 SX-F/XC-F 2016-2024
450 500 EXC-F/XCF-W 2017-2024
KTM 450 SMR 2021-2024
450 RALLY FACTORY 2019-2022
500 XW-F 2024

• FOR Husqvarna

450 FC/FS 2016-2024
450 501 FE/FE S/FX 2017-2024
FR 450 RALLY 2019-2024
FE 501w 2024

• FOR Gas Gas

450 MC F/ EX F/EC F 2021-2024
RX 450F REPLICA 2023-2024
500 EW F/ES/EC F 2024

Installation Instructions:
1. Clean the Contact Surfaces Before installing the gasket, thoroughly clean the water pump contact surface and the engine housing to ensure: No oil, dust, or old sealant residue remains. Use a clean cloth or scraper to remove any debris, and wipe the surface with a degreaser to ensure it is dry and residue-free.
Purpose: To prevent poor sealing and ensure proper adhesion of the sealant.

2. Evenly Apply PTV Engine Sealant Evenly apply a thin, uniform layer of PTV engine sealant to both sides of the gasket. Avoid applying excessive sealant, as this may: Cause poor sealing Lead to sealant overflow, making future disassembly difficult
Note: Use specification-compliant PTV sealant to ensure high-temperature resistance, leak prevention, and long-lasting sealing performance.

3. Proper Installation and Tightening Accurately align the gasket with sealant applied between the water pump and the engine. Tighten the bolts according to the manufacturer’s recommended torque specifications to ensure even compression.
Caution: Avoid over-tightening, as it may: Damage the gasket Deform the contact surface, compromising the seal.

4. Curing Time After installation, allow the sealant to cure undisturbed. Refer to the sealants instructions for curing time to ensure optimal sealing performance before starting the engine.
Tip: Avoid moving or disassembling the parts during the curing process.

5. Safety Tips Wear protective gloves during installation to prevent sealant from contacting the skin. Work in a well-ventilated area to avoid inhaling volatile gases. When cleaning excess sealant, use a dedicated cleaner or alcohol to keep the contact surface clean.

Disclaimer:

Nicecnc parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including KTM, Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, etc.