Tusk TriloBite Tire

Special Notes:

• Please note: Tire sizes vary by machine please check your current tire and wheel size before ordering.

  Adding oversize tires may alter the handling characteristics of your factory equipped vehicle. Extreme care must be used to prevent loss of control or roll over during sharp turns or abrupt maneuvers.

  Oversize tires may rub under extreme steering angles, and extreme suspension compression.

• Size	25×10-12
  Tire Construction	Bias
  Max Seating PSI	15
  Max Operating PSI	7
  Position	Rear
  Sidewall	Blackwall
  Weight	23.23 lbs.
  Rim Size	12
  Directional	No
  Tread Depth	26/32
  Ply Rating	6

  SAFETY

  Refer to your machines documentation for proper maintenance. Always give tires a gentle run-in period of 100 miles to get the feel of new tires. Always match the front and rear tires for optimal handling, safety and performance. Mixing radials with bias may adversely affect handling and stability. Worn/unworn tire combinations and worn tires used in wet conditions can result in deteriorated handling.

  WARNING

  The charts and info on this page do not imply interchangeability. Consult your machines manual to determine correct replacements, clearances, compatibility and stability, load-bearing capacity, speed rating, radial vs. non-radial, pattern and tread compound requirements, inflation recommendations and front-to-rear tire matching. Wrong selection can result in tire failure or loss of control with serious injury or death.

• Heavy duty construction offers a significantly smoother ride over rough trails.
• Extra lugs on the shoulder protect the sidewall and rim.
• Tire is suitable for desert, dirt, rock, mud and snow applications.
• 6-ply rating for optimum puncture resistance.